Custom Metal Fabrication & Welding Repair in Houston, TX
From a gate to a whole fence built from scratch to custom shelving for a wine cellar, if it's a metal component in or around your home, we can fabricate or repair it in-house. Get an instant estimate in minutes, not days.
or
Speak to our Digital Contractor
Get an Instant Estimate, No Waiting, No Site Visit Required
Step 1: Explain Your Project
Start a conversation via text, voice or video.
Cuadrilla will ask questions regarding your project and share the information with us.
Step 2: Share Your Details
During the conversation you will be asked thing like your Name, Address, Phone Number and Email.
This is so we can reference your project better.
Step 3: Get an Estimate
After your AI consultation you will receive an estimate for your project.
A setup call for an in-person visit to confirm final details and project scope.
Custom metalwork is hard to quote sight-unseen; every gate, fence, and repair is a little different. Remodeling Alliance makes it faster with Cuadrilla, our AI project consultant.
Talk to Cuadrilla by text, voice, or video, describe the damage or the piece you want built, and send a few photos. You'll get a real project scope and estimate back in minutes.
This doesn't replace an in-person visit for final measurements and matching existing designs; it replaces the wait to find out what your project will realistically cost.
Custom Metalwork Built for Houston Homes
Houston's humidity is hard on exterior metalwork, untreated or poorly coated iron and steel rust noticeably faster here than in drier climates, which is why every fabrication and repair project includes proper rust treatment and coating, not just a coat of paint over the problem.
We also see a lot of repair work that isn't really about wear and tear at all: a car backing into a gate, a fallen tree limb taking out a fence section after a storm. In those cases, we work to match the existing design and finish rather than replacing the whole run, so the repair blends in instead of looking patched.
From Tile to Hardwoods Floors
Our team brings years of construction experience and uses only high-quality materials to ensure strength, precision, and beauty in every fence we build. We handle projects of all sizes, from backyard enclosures to perimeter security fences, with the same attention to detail.
Metal Fabrication & Repair Services Remodeling Alliance Offers
Metal Gate Fabrication & Repair
New custom gates built to match your home's style, and repair for gates damaged by accidents, wear, or storms, from a bent panel to a full rebuild.
Custom Metal Fence Fabrication & Repair
Full custom metal fences fabricated in-house, plus section repair when part of an existing fence is damaged, including storm and fallen-tree damage, matched to your existing style rather than requiring a full replacement.
Metal Fence Doors & Security Doors
Fabrication, resizing, and repair for metal fence doors and security doors, including doors that no longer fit their opening correctly and need to be resized rather than fully replaced.
Custom Railings & Balconies
Custom railings and balcony fencing, fabricated to match an existing gate design or other metalwork already on your property, so new and old pieces read as one consistent design.
Custom Interior Metalwork
Custom metal features for the inside of your home : wine storage and bar area builds, cellar shelving, and similar one-off pieces designed around the space you actually have.
Home Welding Services in Houston, TX
We offer different types of welding services for you home's interior and exterior areas.r home'
How Much Does Custom Metal Fabrication & Repair Cost in Houston, TX?
Costs vary a lot by project, since most of this work is custom or repair-specific rather than off-the-shelf:
Repair & Small Projects
$300 - $1K
Gate or fence repair, Hinge replacement on metal gates, Rust treatment and touch-up paint
Custom Fabrication
$1K - $5K
Custom metal gate, Staircase railing or balcony railing, Metal fence panels, Decorative ironwork features,
Structural or Estate-Grade
$5K - $25K+
Automated driveway gate systems, Custom spiral or floating staircase, Outdoor kitchen frame and supports
Repair is almost always less expensive than full replacement, and matching an existing design is usually possible even when a section is severely damaged.
Skip the guesswork get a scoped, real-number estimate for your specific project through Cuadrilla above, free and instant.
Remodeling's Alliance Metal Fabrication & Repair Process
A great Welding project starts with a clear plan. We follow our step-by-step process to ensure your project runs smoothly from concept to completion.
Step 1: Instant Estimate
Talk to Cuadrilla (text, voice, or video) to scope your project and compare repair vs. replacement in minutes.
Step 2: In-Home Assessment
We inspect the damage or take measurements for a custom piece in person.
Step 3: Design & Fabrication
Work is fabricated in-house, matched to existing style where relevant.
Step 4: Installation
Our team installs or repairs the piece on-site.
Step 5: Final Walkthrough
You inspect the finished floors before final payment. No surprises.
Frequently Asked Questions about Metal Fabrication & Repair in Houston, TX
Do I have to wait for someone to come to my house to get a metalwork estimate?
No. Remodeling Alliance offers instant estimates for gate, fence, and custom metalwork projects through Cuadrilla, our AI project consultant. You can get a real project scope and price range by text, voice, or video in minutes; no site visit required to get started.
How much does metal gate repair cost in Houston?
Minor gate repairs like hinge replacement typically run $100 to $400, while major damage or a full gate rebuild can run $400 to $1,200 or more, depending on the extent of the damage and the gate's design.
Can a damaged metal fence section be repaired instead of fully replaced?
In most cases, yes. Whether the damage is from an accident, storm, or a fallen tree, we can typically repair and match just the affected section rather than replacing the entire fence, which is usually significantly less expensive.
How much does custom metal fabrication cost?
Custom fabrication costs vary widely by project a custom fence typically runs $50 to $85 per linear foot, custom railings run $50 to $95 per linear foot, and one-off interior pieces like bar areas or shelving typically run $500 to $3,000 or more depending on complexity.
How long does custom metalwork take?
Simple repairs are often completed in a single visit. Custom fabrication projects typically take one to three weeks depending on complexity, since pieces are built in-house rather than ordered pre-made.
Is Remodeling Alliance licensed and insured?
Yes. Remodeling Alliance is a licensed and insured general contractor serving Houston and surrounding communities including Katy, Cypress, Sugar Land, Pearland, and The Woodlands.
Remodeling Alliance Serves Houston, TX and Surrounding Areas
We provide custom metal fabrication and repair throughout Houston, Katy, Cypress, Sugar Land, Pearland, Pasadena, The Woodlands, Spring, Conroe, Magnolia, Tomball, and Memorial. (Link each city name to its corresponding location page once built.)
Have a Metal Gate, Fence, or Feature That Needs Work?
Whether you're ready to begin or just exploring ideas, we'll guide you through every step. Get your instant estimate now no waiting, no site visit required.
Speak to our Digital Contractor
or
